Slide or tap to the color you desire.
Slide or tap to change the maximum brightness level the LEDs will reach. This can help limit power consumption as well.
When checked the animation will occasionally change to a random animation, the change will be synced to a beat hit. Currently this changes through all music reactive animations. You can still manually select an animation while this is checked and that animation will be shown for a period of time and then be automatically changed.
This adjusts how much noise is filtered from the signal, 1 is least filtered, 5 is most filtered. In most cases you will never need to adjust this. If your input signal is very quiet and no effects are showing then turning this down may help. If there is lots of effects occurring when no music is playing then turning this up might help. When using a microphone you can adjust this depending on how loud the ambient noise is so it only picks up music. NOTE: This is a last resort, a clean input signal or a mic worn in a loud-music environment should not require adjusting this and when changed it typically makes no noticeable difference. Check that you have a good input signal or proper mic placement before trying to adjust this.
There are currently no presets included in the app , so there will not be any presets to choose from until after you create your own. Also note that Presets are stored in the app, not on your ViVi controller, so if you save presets using one phone and then connect to your controller with a different phone the presets created on the original phone will not be available.
There are On and Off buttons at the top of the presets tab. Pressing Off will set all outputs to Off and not display anything on the LEDs. Pressing On will restore the last settings that were running, unless you leave the preset tab and adjust settings on the manual tabs, then those adjusted settings will show up.
If the switch is in the Off position it will automatically move back to the On position if you select a preset or if you leave the presets tab and select an animation for an output manually.
To send the settings of a preset to ViVi you tap the center of the preset button that you wish to activate.
When activated the whole button will turn green. The currently active preset will keep a green outline around the button.
If you manually change controller settings outside the preset tab, or if you edit the settings of the currently active preset, the green border will be removed.
You can re-activate the currently active preset by clicking it again. This may be useful if the preset uses auto-animation/color and you want to return to the starting animations/colors again.
To create a new preset, click the circle button with a “+” in the bottom right corner.
New presets will be populated with the current settings of the controller. The easiest way to create presets is to leave the preset tab for the manual tabs and adjust the settings until it matches what you want, then go to the presets tab and click the “+” button.
After clicking the “+” button you will be in the preset editing view, you can view and change all the settings of the new preset. Changing the settings while in the preset editing view will not update those settings to the controller.
After clicking SAVE you will be prompted to name the new preset.
Clicking the 3-dot menu on the right-side of each preset button brings up options for that specific preset:
To change the order of the preset buttons, press and hold on the preset you wish to move, the selected preset button will grow larger and freely move around the screen, drop it where you would like it to go.
Yes, we're open!
We're open and shipping all orders from Virginia Beach, VA within 1 business day.